RIVO NEO N300 MT6261 FIRMWARE FLASH FILE
Rivo NEO N300 MT6261 Firmware Flash File
Rivo NEO N300 MT6261 Firmware Flash File Free
Operation : Read Flash [ v1.19 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )
Wait for phone…
Phone found! [ 30 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 16980B7BF915894B8BCF3A9379F91747
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000
[0] : FLASH_LEN : 0x00800000
SDS : 0x007FE000 , 0x00002000
Reading Flash Conent now …
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )
Wait for phone…
Phone found! [ 30 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 16980B7BF915894B8BCF3A9379F91747
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DC , [MX] MX25U6435E
[0] : FLASH_DIE : 00C2 0025 0037 0000
[0] : FLASH_LEN : 0x00800000
SDS : 0x007FE000 , 0x00002000
Reading Flash Conent now …
Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : FARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.61A_X12_MD_P01_V13.bin
FileVersion : 61A_X12_MD_P01_V13
Saved to : C:InfinityBoxCM2MTKRead_outFARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.61A_X12_MD_P01_V13.bin
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info : FARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.61A_X12_MD_P01_V13.bin
FileVersion : 61A_X12_MD_P01_V13
Saved to : C:InfinityBoxCM2MTKRead_outFARSIGHTED61A_12832_11C_PCB01_gprs_MT6261_S00.61A_X12_MD_P01_V13.bin
Done!
Elapsed: 00:00:31
Reconnect Power/Cable!
Elapsed: 00:00:31
Reconnect Power/Cable!
How To Flash Firmware
- First, you need to download and install sp flash tool
- Download and install MTK android USB drivers
- Your phone must have 50 % charging before this process
- switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
- Now open SPflash tool.exe
- When sp flash tool open, go to download button in sp flash tool
- In download tab, click on scatter load button
- After locating the scatter tab, click on the download button
- Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
- Now flashing is completed, a green ring will appear in sp flash tool
- Close sp flash tool on your computer and unplug phone
- Power on the phone and enjoy
Leave a Reply