Rivo Pz10 qcn Official Firmware Flash File Free

—

RIVO PZ10 QCN OFFICIAL FIRMWARE | FLASH FILE

Rivo Pz10 qcn Official firmware | flash file

First step for Installing Rom

Download and install QPST 2.7.422 with QFIL

Download and install Qualcomm USB Drivers.

Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.

Turn off the phone. Hold Vol+ button and plug-in USB Cable. Phone will vibrate one time, screen wil be black. This is DownloadMode.

There should be device called in device management:

Qualcomm HS-USB QDLoader 9008 (COMXX)

In any other case u have to install drivers manually.

Run QFIL.

Click Browse… in Programmer Path and choose prog_emmc_firehose_8916.mbn

Load XML in Download Section:

First select RawProgram File: rawprogram0.xml

then Select Patch File: patch0.xml

Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:

After flashing process starts and might take up to 5-10 minutes. So keep patience and wait